• Before using sprayer with chemicals, fill sprayer with fresh water to
assure that you have it properly assembled; pressurize and then
practice spraying. When thoroughly familiar with sprayer operation,
follow normal operating procedures.
• Turn pump handle counter clockwise to remove pump.
• Fill tank with premixed formula up to desired level. Do not exceed
maximum fill mark. Observe recommendations of chemical
manufacturer.
• Tighten cap and pump assembly for a good seal.
• Pump to a maximum 45 psi or 3 bar pressure. The valve stem on the
pressure relief valve will rise up to a red mark indicating 45 psi.
• Start or stop spraying by squeezing or releasing the lever on the shut-off
valve (3). The spray pressure can be monitored with an optional pressure
gauge.
• Prior to every removal of pump (1), release pressure first by pulling up
on the pressure relief valve stem (2)
